NVNL

Saving on capex while benefiting from new technologies Optimization of existing plant components Adaptation of the plant for new or changed products Increase in piece number and cycle time Guaranteed spare parts availability Principally retrofitting describes the measures taken in the manufacturing industry to allow new or updated parts to be fitted to old or outdated assemblies (like blades to wind turbines). The production of retrofit parts is necessary in manufacture when the design of a large assembly is changed or revised. If, after the changes have been implemented, a customer (with an old version of the product) wishes to purchase a replacement part then retrofit parts and assembling techniques will have to be used so that the revised parts will fit suitably onto the older assembly. Another example of this is car customizing, where older vehicles are fitted with new technologies: power windows, cruise control, remote keyless systems, electric fuel pumps, et

Rehabilitation of sensory and cognitive function typically involves methods for retraining neural pathways or training new neural pathways to regain or improve neurocognitive functioning that has been diminished by disease or trauma.  Three common neuropsychological problems treatable with rehabilitation are attention deficit/hyperactivity disorder (ADHD), concussion, and spinal cord injury.  Rehabilitation research and practices are a fertile area for clinical neuropsychologists and others. Speech therapy, occupational therapy, and other methods that "exercise" specific brain functions are used.  For example, eye–hand coordination exercises may rehabilitate certain motor deficits, or well structured planning and organizing exercises might help rehabilitate executive functions, following a traumatic blow to the head. Read more  :  structural rehabilitation services in hyderabad

Rehabilitation of sensory and cognitive function typically involves methods for retraining neural pathways or training new neural pathways to regain or improve neurocognitive functioning that has been diminished by disease or trauma. Three common neuropsychological problems treatable with rehabilitation are attention deficit/hyperactivity disorder (ADHD), concussion, and spinal cord injury. Rehabilitation research and practices are a fertile area for clinical neuropsychologists and others. Speech therapy, occupational therapy, and other methods that "exercise" specific brain functions are used. For example, eye–hand coordination exercises may rehabilitate certain motor deficits, or well structured planning and organizing exercises might help rehabilitate executive functions, following a traumatic blow to the head. Brain functions that are impaired because of traumatic brain injuries are often the most challenging and difficult to rehabilitate. Much work is being don

In construction, a building or structure is waterproofed with the use of membranes and coatings to protect contents, and structural integrity. The waterproofing of the building envelope in construction specifications is listed under 07 - Thermal and Moisture Protection within MasterFormat 2004, by the Construction Specifications Institute, and includes roofing and waterproofing materials.[citation needed] In building construction, waterproofing is a fundamental aspect of creating a building envelope, which is a controlled environment. The roof covering materials, siding, foundations, and all of the various penetrations through these surfaces must be water-resistant and sometimes waterproof. Roofing materials are generally designed to be water-resistant and shed water from a sloping roof, but in some conditions, such as ice damming and on flat roofs, the roofing must be waterproof.  Many types of waterproof membrane systems are available, including felt paper or tar paper with asp

Waterproofing is the process of making an object or structure waterproof or water-resistant so that it remains relatively unaffected by water or resisting the ingress of water under specified conditions. Such items may be used in wet environments or under water to specified depths. Water resistant and waterproof often refer to penetration of water in its liquid state and possibly under pressure, whereas damp proof refers to resistance to humidity or dampness. Permeation of water vapor through a material or structure is reported as a moisture vapor transmission rate. The hulls of boats and ships were once waterproofed by applying tar or pitch. Modern items may be waterproofed by applying water-repellent coatings or by sealing seams with gaskets or o-rings. Waterproofing is used in reference to building structures (such as basements, decks, or wet areas), watercraft, canvas, clothing (raincoats or waders), electronic devices and paper packaging (such as cartons for liquids)

Saving on capex while benefiting from new technologies Optimization of existing plant components Adaptation of the plant for new or changed products Increase in piece number and cycle time Guaranteed spare parts availability Principally retrofitting describes the measures taken in the manufacturing industry to allow new or updated parts to be fitted to old or outdated assemblies (like blades to wind turbines). The production of retrofit parts is necessary in manufacture when the design of a large assembly is changed or revised. If, after the changes have been implemented, a customer (with an old version of the product) wishes to purchase a replacement part then retrofit parts and assembling techniques will have to be used so that the revised parts will fit suitably onto the older assembly. Another example of this is car customizing, where older vehicles are fitted with new technologies: power windows, cruise control, remote keyless systems, electric fuel pumps,